Sekonic SR-6500 Instrucciones de operaciones Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 130
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
-61-
Barcode settings
(
when barcode unit is installed
)
You can set the barcode control in SR-3500,SR-6500 mode.
Barcode control
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Go Out Direction] setting,
and press the
FEED/ENTER
switch.
(“
” mark ashes in the rst column of the rst line on the LCD.)
4.
Use the
UP
and
DOWN
switches to set the value.
5.
Press the
FEED/ENTER
switch to save the setting value into memory.
(The ashing
” mark disappears from the LCD.)
6.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Barcode control
setting values
• Valid • Invalid
Barcode settings
Barcode control
SR-3565(E).indd 61SR-3565(E).indd 61 2007-8-16 10:20:172007-8-16 10:20:17
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 129 130

Comentarios a estos manuales

Sin comentarios